Camera input type - toggle between image and barcode data capture (active when Camera is selected varies by device).Input Device - permit selection of input devices such as Camera, Scanner or Bluetooth device (if no Bluetooth device is connected, it attempts to pair to a Bluetooth device).Lightning Bolt - toggle the Camera Flash on or off (active when Camera is selected) control illumination mode for other devices.Toggle camera flash for camera barcode scanĭWDemo menu settings (from left to right):.Toggle camera input type between image and barcode.

Select input device for barcode scan, e.g.

Capture barcode data and display decoded data.

The DWDemo app supports scanning with the imager, camera, Bluetooth device or a magstripe reader (MSR), if one is connected. Decoded data is displayed on the app screen. Once the demo Profile is enabled, tap the app's yellow Scan button or press the device hardware trigger to initiate a barcode scan.

The DWDemo Profile must be enabled and can be modified as needed for testing or demo purposes.

DWDemo soft trigger button triggers all scanners listed in the Scanner Selection.Ī DataWedge Profile called 'DWDemo' is pre-configured in DataWedge and associated with the demo app.

DWDemo displays the scanner used for scanning in addition to the data decoded.

When multiple scanners are configured in the DataWedge profile:.

Pressing the back button again exits the application.

When the scan beam is on, pressing the back button in DWDemo does not exit the application - instead, it stops scanning.

It is provided by default on all Zebra Android devices. DWDemo provides barcode scanning capabilities, demonstrating how data is acquired by an application using the DataWedge intent output.

Datawedge 3.7 idle